When I get back from doggy walk I'll try switching off wifi. Odd that
LinuxCNC works though. Sent from my Samsung S10
-------- Original message --------From: Gene Heskett <ghesk...@shentel.net>
Date: 2021-06-11 11:04 a.m. (GMT-08:00) To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pi4 issues with MESA 7i92H On Friday 11 June 2021
12:05:38 John Dammeyer wrote:> Sam,> Here's the ifconfig output generated from
putty running on my WIN-7> workstation via remote desktop from my WIN-10 ZBook.
Ethernet cable> from Pi4 to 7i92 is 2' long.>> And with or without LinuxCNC
running this is what I get:> pi@linuxcnc:~ $ cd mesaflash>
pi@linuxcnc:~/mesaflash $ sudo ./mesaflash --device 7i92 --readhmid>
lbp16_access.send_packet: Operation not permitted> Aborted>> John>>
pi@linuxcnc:~ $ ifconfig> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu
1500> inet 192.168.1.1 netmask 255.255.255.0 broadcast> 192.168.1.255
ether dc:a6:32:1e:30:f1 txqueuelen 1000 (Ethernet)> RX packets
29442387 bytes 2826463726 (2.6 GiB)> RX errors 0 dropped 0 overruns
0 frame 0> TX packets 58886151 bytes 1122489823 (1.0 GiB)> TX
errors 0 dropped 0 overruns 0 carrier 0 collisions 0>> lo:
flags=73<UP,LOOPBACK,RUNNING> mtu 65536> inet 127.0.0.1 netmask
255.0.0.0> inet6 ::1 prefixlen 128 scopeid 0x10<host>> loop
txqueuelen 1000 (Local Loopback)> RX packets 595 bytes 40144 (39.2
KiB)> RX errors 0 dropped 0 overruns 0 frame 0> TX packets
595 bytes 40144 (39.2 KiB)> TX errors 0 dropped 0 overruns 0 carrier
0 collisions 0>> wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500>
inet 192.168.0.97 netmask 255.255.255.0 broadcast> 192.168.0.255 inet6
fe80::9d66:1b85:f539:da50 prefixlen 64 scopeid> 0x20<link> ether
dc:a6:32:1e:30:f2 txqueuelen 1000 (Ethernet)> RX packets 11119 bytes
3535970 (3.3 MiB)> RX errors 0 dropped 0 overruns 0 frame 0>
TX packets 3108 bytes 415864 (406.1 KiB)> TX errors 0 dropped 0
overruns 0 carrier 0 collisions 0I see one possibility, Ralph.This doesn't
show the default route. But "ip r" will. You are eth0 at 192.168.1.x and wlan0
at 192.168.0.x. If the default route is thru wlan0, mesaflash will probably
fail.I'm using a 7i90 over spi, so my eth0 or whatever name its using this week
is free for normal use, but that's just one of the reasons I keep the #@%##
radios turned off, once avahi gets it in its mind to use the radio, ip can't or
won't fix it, so you have to manually nuke the avahi executable and reboot. In
your case, rename it to rumplestiltskin or whatever so you can restore it if
I'm wrong.Take care and stay well.[...]Cheers, Gene Heskett-- "There are four
boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please
use in that order."-Ed Howdershelt (Author)If we desire respect for the law, we
must first make the law respectable. - Louis D. BrandeisGenes Web page
<http://geneslinuxbox.net:6309/gene>_______________________________________________Emc-users
mailing
listEmc-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
