ceturtd., 2026. g. 6. aug., plkst. 16:59 — lietotājs Peter Wallace (<[email protected]>) rakstīja: > > Yes, try lspci > > say: > > > lspci -vvvn | grep -A 10 2718 >
Results from plain lspci at first and then lspci -vvvn | grep -A 10 2718 is shown here: https://photos.app.goo.gl/3UuV6Rof2zf2522q6 I am suspicious about the entry at 04:00.0 - DPIO module: Device 2718:5124 (rev 01) It contains numbers 2718 and looks almost like 5I24 with capital letter "i". > > Does LinuxCNC see the card? > It seems to me that no, it does not show up in LinuxCNC: https://photos.app.goo.gl/iNcYL9fEbZWYukDH8 I was running sample racktoolchange config if that changes anything, although I would expect 5i24 board to show in the list of available HAL pins, but then I do allow for possibility that it might depend on preloaded firmware (whatever there is by default). Secure boot is disabled: https://photos.app.goo.gl/JSsNpANoZfHd6oFi8 I disabled also SR-I0V which mentions something about virtualization but it is in section of PCI config: https://photos.app.goo.gl/2YVAzLxDQCvcS5WT6 Viesturs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
