ceturtd., 2026. g. 6. aug., plkst. 23:04 — lietotājs Peter Wallace (<[email protected]>) rakstīja: > > > I would not expect linuxcnc to launch if the (hm2_pci) driver was invoked in > the hal file but no card was found. > > like this: > > hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 > hm2_pci: rtapi_app_main: No such device (-19) > > and exit >
Thank you! Then I will take this as somewhat good news. https://photos.app.goo.gl/JeXsfNADGWaLzwKk7 I added 2 lines in HAL file (highlighted on right side) and I started LinuxCNC from terminal for easier understanding if something is wrong. Looks good to me. So the question for 10K is how to flash it with 5i24_16_svss8_8.bit I have another machine with LinuxCNC at home that might have pci-e slot to plug this in, unless the issue will move together with the board Viesturs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
