Bob Turner wrote:
> [snip]
>
> I have my OCSC2 in front of me and the connections I have are as follows:
> On the body end there is 5-pin connector plus the locking ring.
> On the other end there is the 5-pin flash unit receiver and underneath that
> is a plain plastic moulding (8mm x 8mm) with a 1/4" threaded tripod socket
> . There are no grooves on this moulding, should there be a metal plate on here?
>
> Thanks,
> Bob
Hi Bob and all,
although I don't own an OCSC2 I am suspecting a communications problem
here. ;)
Looking (search for CASC2OC) at the B&H web-site I found a device which
I believe is what Bob has:
http://www01.bhphotovideo.com/images/items/12972.jpg
It doesn't look like it had any means to mount the remote end to any
kind of 'hot-shoe'.
Are you guys talking about the same device???
Cheers,
Andi
--
Dr. Andreas Lösch
Medical Market Development Manager
SGI phone: +49 (89) 46108-334
Am Hochacker 3 fax: +49 (89) 46107-334
D-85630 Grasbrunn email: [EMAIL PROTECTED]
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
