----- Original Message -----
From: "Kim" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, April 11, 2001 2:35 PM
Subject: Re: EOS Flash Bracket for 550EX+OCSC2
| > . There are no grooves on this moulding, should there be a metal plate
on
| here?
|
| No, not a metal plate but on each side of the plastic square piece with
the
| tripod socket, there should be a groove. Did you buy your OCSC new?
|
| Kim
Yes I did, but quite some time ago. I usually hand-hold the flash but I
would like to have it on a support for this wedding. I guess I'll go down to
my local Jessops at the weekend and see if they have one in stock for a
comparison.
| Are you sure? Is there an adjustment on your bracket you can loosen or
| tighten to allow the OCSC2 to slip on? Do you have the base thingie facing
| in the right direction, cord to the front? I use the OCSC2, and it fits on
| my Stroboframe bracket, and I just checked and the part that fits on the
| bracket also fits perfectly into the camera's hot shoe, so if your bracket
| has a hot shoe-like place to attach it, it should fit.
|
| Kim
There is a fixing on the bracket to take a flash but as others have said
about the grooves on the base, they are not on mine 8o(
Bob Turner
Dundee, Scotland, U.K.
Website : www.bawbee.co.uk
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
