> Date: Thu, 25 Apr 2002 10:25:11 -0700
> From: Mike Herkes <[EMAIL PROTECTED]>
> Subject: EOS Camera problem?
>
> Hello.
>
> I am just wondering if anyone has experienced anything like this before. I
> have started getting prints back from my lab and they have a black edge
> along the top of the print starting about the middle of the print and
> getting slightly thicker as it moves to the right. Sometimes it is across
> the entire top and sometimes it does not exist. I am trying to determine
> if I have a camera problem or a lab problem.
> Has anyone ever experienced any problems with an EOS 3 and a older
> speedotron brownline system? It is about 8-10 years old. I did get the
> voltage adapter, so that is not an issue.
"Speedotron brownline". That sounds like a flash unit. Could you have a flash sync
problem? Normally the camera should sync with an electronic flash at 1/125 S or
slower, but there may be more of a delay with this unit. I would try a much slower
shutter speed to see what happens. IIRC, with a Canon flash, the camera won't let you
set a faster speed, but that may be possible
with a third party flash.
Geoff Doane
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
