Hello. I am just wondering if anyone has experienced anything like this before. I have started getting prints back from my lab and they have a black edge along the top of the print starting about the middle of the print and getting slightly thicker as it moves to the right. Sometimes it is across the entire top and sometimes it does not exist. I am trying to determine if I have a camera problem or a lab problem.
I also took a roll in the other day and it came back with some blank frames and I have no clue why. The frames almost look like the pictures were taken with a lens cap on, but obviously it was not. It would have been slightly hard to compose the picture.....hahaha. Anyway, I am running a practice roll just through a one hour place and having a problematic roll reprinted also to see if the same results show up. What worries me more right now are the blank frames on this one roll. Has anyone ever experienced any problems with an EOS 3 and a older speedotron brownline system? It is about 8-10 years old. I did get the voltage adapter, so that is not an issue. I am just a tad bit worried since I need the camera for tomorrow. I will have to think of something if it appears I have a camera problem. But, if anyone has experienced anything like this, please let me know. Or, worst case, anyone know a good place in Chicago to rent an EOS 3? * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
