Hi!
On Mon, 29 Jul 2013 11:25:57 -0700, Stefan Eilemann wrote:
> > I'm trying to create an equalizer configuration file for a curved
> > screen/powerwall setup.
> [...]
> The bino default mode only uses the 2D viewport of the segments/views
> to layout the video. See the bino manual for a description of the two
> modes.
I have a related question.
We have a cylindrical screen, and for Bino we currently switch the
projector calibration from 'VR' to a '2D presentation' mode which
assumes that the cylinder is actually a plane. Then, we define an
Equalizer configuration with a planar canvas on which Bino can render
the video.
However, the ability to switch to a '2D presentation' calibration
will soon be removed. To still get the same effect in the 'VR'
calibration, we need to render our 2D presentation onto a 3D geometry
that exactly matches the cylinder geometry. (For that purpose, eqvnc
supports the --screen=cylinder,... option.)
Now, the documentation of Bino's "-o equalizer-3d" option suggests that
it is also possible to achieve the same effect with a special Equalizer
configuration ("Other setups include distortion-correct projection for
curved screens").
Can you give an example? I found no hints on the website or in the
Programming Guide.
Regards,
Martin
_______________________________________________
eq-dev mailing list
[email protected]
http://www.equalizergraphics.com/cgi-bin/mailman/listinfo/eq-dev
http://www.equalizergraphics.com
