----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Bob, I used a Malco cutter , you will also need a 90 degree drill above the wheels . You can get one by calling 800 248 0638 and ask for part number HCI, adjustable hole cutter, $46. Good luck,Pete
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 05, 2003 10:45 AM
To: [email protected]
Subject: [COUPERS-FLYIN] Re: Digest list: Ercoupe Hangar Flying
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Does anyone know the proper tool to use to cut the 8 - 4" inspection holes in the center section of the Ercoupe wing section that is required by the current corrision AD. Also need a source of supply for any recommended tool if possible. Any help would be apreciated.
Bob Bullock
N5621F Alon A2
Maryland
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers/
========================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
