----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
At 10:03 PM 2/4/03 -0600, Dave T wrote:
>hope I'm using the
>correct group.
You most certainly are - Welcome Aboard!!
>I am recovering (under the supervision of an IA) the wings
>of my 1946 415C.
Did that myself a couple years ago. The top failed the punch
test.
> Does
>anyone know if it's mandatory that I replace the entire leading edge or
is
>there an approved way to repair the tear only?
You should get good ideas on this, but you can check `em out with John
Wright Sr {(217) 546-0585}, Ercoupe fixer extraordinaire. Also call Syd
Cohen in Wausau (715) 842-7814.
>Also wondering if there are any areas that have to receive additional
>attention while we're in there.
Just have an extreamly good look at everything while you're in there.
Percy in Portland, Oregon.
==========================================================================
====
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
