----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I need to "flash" my regulator. It was posted a year or so ago, but I have forgotten. Is it "Field to ground?" or "generator to ground?" or "battery to ground?" docruss --- Ercoupe Technical Discussion <[email protected]> wrote: > ----[Please read http://ercoupers.com/disclaimer.htm > before following any advice in this forum.]---- > > > Message list: > > 1. Re: [COUPERS-TECH] noisy Belleville Springs > 2. Re: [COUPERS-TECH] noisy Belleville Springs > 3. Re: [COUPERS-TECH] noisy Belleville Springs > > Messages: > > From: [EMAIL PROTECTED] > To: [email protected] > Reply-To: [EMAIL PROTECTED] > Subject: Re: [COUPERS-TECH] noisy Belleville Springs > > Hi all. I recall asking this question a few months > ago, but do not recall > the answers. I have an Alon coming into annual this > month which snaps & pops > when you step on the left wing. I have determined > the sound is coming from the > Belleville Springs, which seem to be over springing > (bending?). In any case, > has anyone else come across this problem, and if > so, what did you do to solve > the problem. > I put a completely different stack of Belleville > Springs on the strut, > but got the same problem. I do not believe there is > any problem structurally. > Lynn Nelsen > > > ---------------------------- > From: "Dr. R. B." <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]>,<[email protected]> > Reply-To: "Dr. R. B." <[EMAIL PROTECTED]> > Subject: Re: [COUPERS-TECH] noisy Belleville Springs > > Are you sure this isn't 'oil-canning,' in which > loose rivets sound like an oil can popping when you > flex the wing up and down a few inches standing at > the wingtip? > > R. Beeman > ----- Original Message ----- > From: [EMAIL PROTECTED] > To: [email protected] > Sent: Friday, June 03, 2005 3:02 PM > Subject: Re: [COUPERS-TECH] noisy Belleville > Springs > > > ----[Please read http://ercoupers.com/disclaimer.htm > before following any advice in this forum.]---- > > > Hi all. I recall asking this question a few months > ago, but do not recall the answers. I have an Alon > coming into annual this month which snaps & pops > when you step on the left wing. I have determined > the sound is coming from the Belleville Springs, > which seem to be over springing (bending?). In any > case, has anyone else come across this problem, and > if so, what did you do to solve the problem. > I put a completely different stack of > Belleville Springs on the strut, but got the same > problem. I do not believe there is any problem > structurally. > Lynn Nelsen > ========================================================================== ==== > To leave this forum go to: > http://ercoupers.com/lists.htm > Search the archives on > http://escribe.com/aviation/coupers-tech/ > > > > > > ---------------------------- > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED], [email protected] > Reply-To: [EMAIL PROTECTED] > Subject: Re: [COUPERS-TECH] noisy Belleville Springs > > Yes Sir Dr. Beeman. I have checked, and you can see > the Belleville springs > try to turn inside out when the popping sound > occurs. They actually compress > more when they make the popping sound. I took the > first stack apart, and the > springs were not broken or coming apart either. > Lynn Nelsen > > > ---------------------------- > > > ========================================================================== ==== > To leave this forum go to: > http://ercoupers.com/lists.htm > Search the archives on > http://escribe.com/aviation/coupers-tech/ > > > > Dr. Russell Whetton 859 Washington Blvd. Ogden, Utah 84404 801-393-8880 801-393-8881 fax __________________________________ Do you Yahoo!? Yahoo! Mail - Find what you need with new enhanced search. http://info.mail.yahoo.com/mail_250 ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
