Installed wrong was my problem too. Whoever did it put the FELT STRIP on the inside of the groove, That error allowed the felt to wear and bunch up, locking the window travel. The felt strip does not go on the inside where it contacts the window, it goes between the welting and the metal channel.
--- In [email protected], John Craparo <john.crap...@...> wrote: > > Kevin, > > You may have to replace it, but first try lubricating the track in the vinyl > welt. I use white lithium grease. You can buy it in any auto parts store. > Get it in the tube, not the spray. The spray, even with the applicator > straw, may blow back at you when spraying into the groove. I take the small > tube, cut the tip at nearly the very end, then place a bb size drop 4 places > along each track. Then I slide the windows up and down until they run > smooth. > > Your problem may be that the vinyl was installed backward. The slick side > should make up the groove which receives the sliding window. > > Best, > John > > > On Mon, May 10, 2010 at 11:11 AM, kevinustin <kevinaustin...@...>wrote: > > > > > > > I need to replace the vinyl or something because i can not get the side > > windows all of the way up because the vinyl bunches together. I am a new > > EWrcoupe owner and looking forward to flying this 415 C > > > > > > >
