Fellow CADlings
I went to the IMSI site and did some research. The sugestion was for v8 users to
save in R12 format. We should be able to then read them with the free version. It
was also mentioned that the now inexpensive v7 TC could read v8 files.
Also the image files didn't work in Netscape, but are fine in IE6.
As to the engine design, it looks a little like a carberator, have you seen any
parraleles? Do you have to choke when cold?
Is the list working?
John Carmack wrote:
> At 10:31 PM 9/1/2002 -0400, you wrote:
> >I could not open the file with version 4.1 of Turbo Cad. That is the free
> >downloadable version. Can you post in another format? I could not open it in
> >Autocad either.
>
> I have V8, which is likely fairly different. I have put up two different
> versions:
>
> A "turboCAD ascii file", which you probably also can't view:
>
> http://media.armadilloaerospace.com\CAD\sixInchRegen2.tcx
>
> A DXF verson.
>
> http://media.armadilloaerospace.com\CAD\sixInchRegen2.dxf
>
> The "publish to HTML" option, which anyone can view, but no zooming or editing.
>
> http://media.armadilloaerospace.com\CAD\sixInchRegen\sixInchRegen2_Paper%201.htm
>
> See if the DXF loads in autocad and looks like the HTML version.
>
> John Carmack
>
> _______________________________________________
> ERPS-list mailing list
> [EMAIL PROTECTED]
> http://lists.erps.org/mailman/listinfo/erps-list
--
>>>>>>>>>>>>>>>>----<<<<<<<<<<<<<<<<<
........ Alex Fraser N3DER .........
......... [EMAIL PROTECTED] .......
[~]_>^</\-[~]_>^</\-[~]_>^</\-[~]_>^<
_______________________________________________
ERPS-list mailing list
[EMAIL PROTECTED]
http://lists.erps.org/mailman/listinfo/erps-list
