Looks like we aren't getting the thicker pucks afterall...The following is from the October Fastrack published today.
<QUOTE> The following items were rejected by the Board of Directors GCR ... FORMULA Item 6. (F500) Effective 11/1/06, change section 17.1.6.E.3.c to read as follows: Blocks, bushings, and/or mounts of rubber or similar material shall be used to isolate engine and drive assemblies, and/or axles from vibration, shock, or track irregularities. The number of mounts shall not exceed one (1) per wheel and shall not exceed three (3) inch in thickness in uncompressed state nor shall they be stacked. The diameter of the mounts shall not exceed two (2) inches. The mounts shall carry the weight of the car. Installation will be evaluated on compliance with both the letter and the intent of this provision.three (3) inch in thickness in uncompressed state nor shall they be stacked. The diameter of the mounts shall not exceed two (2) inches. The mounts shall carry the weight of the car. Installation will be evaluated on compliance with both the letter and the intent of this provision.exceed two (2) inches. The mounts shall carry the weight of the car. Installation will be evaluated on compliance with both the letter and the intent of this provision. </QUOTE> ________________________________ FormulaCar Magazine - A Proud Supporter of Formula 500 The Official Publication of Junior Formula Car Racing Subscribe Today! www.formulacarmag.com or 519-624-2003 _________________________________ _______________________________________________ F500 mailing list - [email protected] To unsubscribe or change options please visit: http://f500.org/mailman/listinfo/f500 *** Please, DO NOT send unsubscribe requests to the mailing list! ***
