I don't understand. Doesn't it say below that effective 11-1-06 the pucks
can be up to 3" thick? Isn't that what we were looking for or am I missing
something?
Ron
From: "Jan Schmidt" <[EMAIL PROTECTED]>
Reply-To: [email protected]
To: [email protected]
Subject: Re: [F500] New Fastrack - BOD rejects F500 puck rule change
Date: Wed, 20 Sep 2006 13:33:39 -0500
Damn! Us F500 guys cant seem to get any play at all? What's up?
Bill Schmidt 88 Red Devil Kawi
>>> "Sheldon Lemoine" <[EMAIL PROTECTED]> 09/20/06 10:43 AM >>>
Looks like we aren't getting the thicker pucks afterall...The
following is from the October Fastrack published today.
<QUOTE>
The following items were rejected by the Board of Directors
GCR
...
FORMULA
Item 6. (F500) Effective 11/1/06, change section 17.1.6.E.3.c to read
as follows: Blocks, bushings, and/or mounts of rubber or similar
material
shall be used to isolate engine and drive assemblies, and/or axles
from vibration, shock, or track irregularities. The number of mounts
shall not
exceed one (1) per wheel and shall not exceed three (3) inch in
thickness in uncompressed state nor shall they be
stacked. The diameter of the mounts shall not exceed two (2) inches.
The mounts shall carry the weight of the car.
Installation will be evaluated on compliance with both the letter and
the intent of this provision.
________________________________
FormulaCar Magazine - A Proud Supporter of Formula 500
The Official Publication of Junior Formula Car Racing
Subscribe Today! www.formulacarmag.com or 519-624-2003
_________________________________
_______________________________________________
F500 mailing list - [email protected]
To unsubscribe or change options please visit:
http://f500.org/mailman/listinfo/f500
*** Please, DO NOT send unsubscribe requests to the mailing list! ***
