I'm getting very strange behavior from FLARQ 4.3.1 with FLDIGI 3.20.12
on both my Vista desktop and xp netbook.
In testing with my VISTA desktop, trying to connect from another
station, I would get the station in the FLARQ window, click connect but
get a very long delay from when I hit the button and when it
transmitted. After successfully connecting, my machine would
consistently double with the other connected station.
Today I decided to run a test between the netbook and the desktop and
when I clicked the beacon button on the netbook, it went it did not
generate any sound but just went into the beacon timer mode.
Going back to the Desktop I tried hitting the beacon button and it too
went into the timer mode... just for the heck of it I decided to go into
FLDIGI and switch from PSK250R to BPSK and suddenly FLARQ/FLDIGI started
transmitting... I then got an error window pop up and here is the log:
Q: main: fldigi 3.20.12 log started on Mon May 31 16:09:53 2010
Q: log_excluded_modes: RSID (rx) : CW DomEX4 DomEX5 FELDHELL SLOWHELL
HELLX5 HELLX9 FSK-HELL FSK-H105 HELL80 MFSK-8 MFSK16 MFSK-32 MFSK-4
MFSK-11 MFSK-22 MFSK-31 MFSK-64 BPSK31 BPSK63 BPSK125 BPSK250 BPSK500
QPSK31 QPSK63 QPSK125 QPSK250 QPSK500 RTTY THOR4 THOR5 THOR8 THOR11
THOR16 THOR22 THROB1 THROB2 THROB4 THRBX1 THRBX2 THRBX4
Q: log_excluded_modes: RSID (tx) : CW BPSK31 RTTY
Q: log_excluded_modes: CWID : CW
Q: log_excluded_modes: VIDEOID : CW BPSK31 RTTY
I: testCommPorts: Found serial port COM1
I: testCommPorts: Found serial port COM3
I: open_talker: Talker Server not available
I: speak: Talker server not available
E: WriteARQsocket: send: Bad file descriptor
-Dave, KB3FXI
_______________________________________________
fldigi-alpha mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/fldigi-alpha
