But I am running VAC out on 70 cm rx 1. How do I output audio from RX2? I need 70 cm to be on rx1. And why, in the original setup, does TX antenna show to be ANT1 when it is really the 70 mc port?
Richard Tim Ellison <[email protected]> wrote: (05/08/2011 22:49) >Since the V/U antennas are fixed (not selectable), you do not set them and >consequently they will not show up assigned to RX1 or RX2. > >All you have to do is set the Antenna form to Expert mode, on 6m set RX1 to >ANT-1 (2 or 3) and it will be displayed on VFO-A. Turn on RX2 and select 70cm >as the band and it will show up in VFO-B > > >-Tim > > >-----Original Message----- >From: [email protected] [mailto:[email protected]] >On Behalf Of richard allen >Sent: Sunday, May 08, 2011 11:08 PM >To: [email protected] >Subject: [FlexEdge] 70cm/6m > >Running flex5000/rx2/vubox/tuner and 2.0.22 > >I have my 6m antenna coming in the ant1 port and 70 cm antenna into the 70cm >port. >I want to listen on both 70 cm and 6m at the same time. When I try to set rx2 >input to antenna 1 it tells me that antenna 1 is in use by RX1. RX1 is tuned >to 70 cm. How do I do this? > >Also, the panel shows TX:ANT1 when I would think it would show 70cm antenna... > >Thanks, > >Richard W5SXD > >_______________________________________________ >Flexedge mailing list >[email protected] >http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used >for posting topics related to SDR software development and experimentalist who >are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
