So how do I get to VAC from 70 cm on rx2? I want run VAC on 70 cm and listen on 6 m.
Also, the console shows TX:ANT1 when RX1 is on 70 cm. Why is that? Richard On May 9, 2011, at 8:04 AM, Tim Ellison <[email protected]> wrote: > One thing I forgot to add. The correct antenna assignments are shown on the > console when you have V and or U on RX1 and/or RX2. > > > -Tim > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Tim Ellison > Sent: Monday, May 09, 2011 7:21 AM > To: richard allen > Cc: [email protected] > Subject: Re: [FlexEdge] 70cm/6m > > There are known issues with the way the Antenna form "works" from a > presentation standpoint. So the "why" is a deficiency. > > > -Tim > > > -----Original Message----- > From: richard allen [mailto:[email protected]] > Sent: Monday, May 09, 2011 6:30 AM > To: Tim Ellison > Cc: [email protected]; [email protected] > Subject: Re: [FlexEdge] 70cm/6m > > But I am running VAC out on 70 cm rx 1. How do I output audio from RX2? I > need 70 cm to be on rx1. > And why, in the original setup, does TX antenna show to be ANT1 when it is > really the 70 mc port? > > Richard > > Tim Ellison <[email protected]> wrote: > (05/08/2011 22:49) > >> Since the V/U antennas are fixed (not selectable), you do not set them and >> consequently they will not show up assigned to RX1 or RX2. >> >> All you have to do is set the Antenna form to Expert mode, on 6m set RX1 to >> ANT-1 (2 or 3) and it will be displayed on VFO-A. Turn on RX2 and select >> 70cm as the band and it will show up in VFO-B >> >> >> -Tim >> >> >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] On Behalf Of richard allen >> Sent: Sunday, May 08, 2011 11:08 PM >> To: [email protected] >> Subject: [FlexEdge] 70cm/6m >> >> Running flex5000/rx2/vubox/tuner and 2.0.22 >> >> I have my 6m antenna coming in the ant1 port and 70 cm antenna into the 70cm >> port. >> I want to listen on both 70 cm and 6m at the same time. When I try to set >> rx2 input to antenna 1 it tells me that antenna 1 is in use by RX1. RX1 is >> tuned to 70 cm. How do I do this? >> >> Also, the panel shows TX:ANT1 when I would think it would show 70cm >> antenna... >> >> Thanks, >> >> Richard W5SXD >> >> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used >> for posting topics related to SDR software development and experimentalist >> who are using beta versions of the software. > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
