Thanks for the clarification, Al.
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Al Ward Sent: Tuesday, May 10, 2011 9:32 AM To: [email protected]; [email protected] Subject: Re: [FlexEdge] 70cm/6m Tim No the external preamp in and out will only work with RX1 and not RX2. 73 Al -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tim (W4TME) Sent: Monday, May 09, 2011 3:44 PM To: [email protected] Subject: Re: [FlexEdge] 70cm/6m I am 99% sure that the RX loop is linked to RX1 and not a particular ANT port regardless if it is RX1 or RX2 -Tim --- W4TME FlexRadio Systems Internet Systems Admin. Product Verification Team Tune In Excitement^(TM) On 5/9/2011 11:42 AM, Al Ward wrote: > Richard > The only down side of using ANT1 on 6M for RX2 is that you can not > take advantage of the 6M preamp that you may have installed on the RX1 > in/out ports. > 73 > Al W5LUA > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Eric Wachsmann > Sent: Monday, May 09, 2011 3:08 PM > To: Richard Allen > Cc: [email protected] > Subject: Re: [FlexEdge] 70cm/6m > > Richard, > > Due to the way the antenna form works, I would recommend doing what > Tim suggested. Just change the 70cm RX1 Antenna selection to > something other than ANT1. This will not affect the fact that 70cm > must be received on the 70cm plug. This will allow you to use ANT1 > for 6m on RX2. > > > Eric Wachsmann > FlexRadio Systems > > On Mon, May 9, 2011 at 9:14 AM, Richard Allen<[email protected]> wrote: > >> So how do I get to VAC from 70 cm on rx2? I want run VAC on 70 cm >> and listen on 6 m. >> >> Also, the console shows TX:ANT1 when RX1 is on 70 cm. Why is that? >> >> Richard >> >> On May 9, 2011, at 8:04 AM, Tim Ellison<[email protected]> wrote: >> >>> One thing I forgot to add. The correct antenna assignments are >>> shown on >> the console when you have V and or U on RX1 and/or RX2. >>> >>> -Tim >>> >>> >>> -----Original Message----- >>> From: [email protected] [mailto: >> [email protected]] On Behalf Of Tim Ellison >>> Sent: Monday, May 09, 2011 7:21 AM >>> To: richard allen >>> Cc: [email protected] >>> Subject: Re: [FlexEdge] 70cm/6m >>> >>> There are known issues with the way the Antenna form "works" from a >> presentation standpoint. So the "why" is a deficiency. >>> >>> -Tim >>> >>> >>> -----Original Message----- >>> From: richard allen [mailto:[email protected]] >>> Sent: Monday, May 09, 2011 6:30 AM >>> To: Tim Ellison >>> Cc: [email protected]; [email protected] >>> Subject: Re: [FlexEdge] 70cm/6m >>> >>> But I am running VAC out on 70 cm rx 1. How do I output audio from RX2? >> I need 70 cm to be on rx1. >>> And why, in the original setup, does TX antenna show to be ANT1 when >>> it >> is really the 70 mc port? >>> Richard >>> >>> Tim Ellison<[email protected]> wrote: >>> (05/08/2011 22:49) >>> >>>> Since the V/U antennas are fixed (not selectable), you do not set >>>> them >> and consequently they will not show up assigned to RX1 or RX2. >>>> All you have to do is set the Antenna form to Expert mode, on 6m >>>> set RX1 >> to ANT-1 (2 or 3) and it will be displayed on VFO-A. Turn on RX2 and >> select 70cm as the band and it will show up in VFO-B >>>> >>>> -Tim >>>> >>>> >>>> -----Original Message----- >>>> From: [email protected] [mailto: >> [email protected]] On Behalf Of richard allen >>>> Sent: Sunday, May 08, 2011 11:08 PM >>>> To: [email protected] >>>> Subject: [FlexEdge] 70cm/6m >>>> >>>> Running flex5000/rx2/vubox/tuner and 2.0.22 >>>> >>>> I have my 6m antenna coming in the ant1 port and 70 cm antenna into >>>> the >> 70cm port. >>>> I want to listen on both 70 cm and 6m at the same time. When I try >>>> to >> set rx2 input to antenna 1 it tells me that antenna 1 is in use by >> RX1. RX1 is tuned to 70 cm. How do I do this? >>>> Also, the panel shows TX:ANT1 when I would think it would show 70cm >> antenna... >>>> Thanks, >>>> >>>> Richard W5SXD >>>> >>>> _______________________________________________ >>>> Flexedge mailing list >>>> [email protected] >>>> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >>>> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It >>>> is >> used for posting topics related to SDR software development and >> experimentalist who are using beta versions of the software. >>> >>> _______________________________________________ >>> Flexedge mailing list >>> [email protected] >>> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >>> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It >>> is >> used for posting topics related to SDR software development and >> experimentalist who are using beta versions of the software. >> >> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It >> is used for posting topics related to SDR software development and >> experimentalist who are using beta versions of the software. >> > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
