Richard The only down side of using ANT1 on 6M for RX2 is that you can not take advantage of the 6M preamp that you may have installed on the RX1 in/out ports. 73 Al W5LUA
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Eric Wachsmann Sent: Monday, May 09, 2011 3:08 PM To: Richard Allen Cc: [email protected] Subject: Re: [FlexEdge] 70cm/6m Richard, Due to the way the antenna form works, I would recommend doing what Tim suggested. Just change the 70cm RX1 Antenna selection to something other than ANT1. This will not affect the fact that 70cm must be received on the 70cm plug. This will allow you to use ANT1 for 6m on RX2. Eric Wachsmann FlexRadio Systems On Mon, May 9, 2011 at 9:14 AM, Richard Allen <[email protected]> wrote: > So how do I get to VAC from 70 cm on rx2? I want run VAC on 70 cm and > listen on 6 m. > > Also, the console shows TX:ANT1 when RX1 is on 70 cm. Why is that? > > Richard > > On May 9, 2011, at 8:04 AM, Tim Ellison <[email protected]> wrote: > > > One thing I forgot to add. The correct antenna assignments are > > shown on > the console when you have V and or U on RX1 and/or RX2. > > > > > > -Tim > > > > > > -----Original Message----- > > From: [email protected] [mailto: > [email protected]] On Behalf Of Tim Ellison > > Sent: Monday, May 09, 2011 7:21 AM > > To: richard allen > > Cc: [email protected] > > Subject: Re: [FlexEdge] 70cm/6m > > > > There are known issues with the way the Antenna form "works" from a > presentation standpoint. So the "why" is a deficiency. > > > > > > -Tim > > > > > > -----Original Message----- > > From: richard allen [mailto:[email protected]] > > Sent: Monday, May 09, 2011 6:30 AM > > To: Tim Ellison > > Cc: [email protected]; [email protected] > > Subject: Re: [FlexEdge] 70cm/6m > > > > But I am running VAC out on 70 cm rx 1. How do I output audio from RX2? > I need 70 cm to be on rx1. > > And why, in the original setup, does TX antenna show to be ANT1 when > > it > is really the 70 mc port? > > > > Richard > > > > Tim Ellison <[email protected]> wrote: > > (05/08/2011 22:49) > > > >> Since the V/U antennas are fixed (not selectable), you do not set > >> them > and consequently they will not show up assigned to RX1 or RX2. > >> > >> All you have to do is set the Antenna form to Expert mode, on 6m > >> set RX1 > to ANT-1 (2 or 3) and it will be displayed on VFO-A. Turn on RX2 and > select 70cm as the band and it will show up in VFO-B > >> > >> > >> -Tim > >> > >> > >> -----Original Message----- > >> From: [email protected] [mailto: > [email protected]] On Behalf Of richard allen > >> Sent: Sunday, May 08, 2011 11:08 PM > >> To: [email protected] > >> Subject: [FlexEdge] 70cm/6m > >> > >> Running flex5000/rx2/vubox/tuner and 2.0.22 > >> > >> I have my 6m antenna coming in the ant1 port and 70 cm antenna into > >> the > 70cm port. > >> I want to listen on both 70 cm and 6m at the same time. When I try > >> to > set rx2 input to antenna 1 it tells me that antenna 1 is in use by > RX1. RX1 is tuned to 70 cm. How do I do this? > >> > >> Also, the panel shows TX:ANT1 when I would think it would show 70cm > antenna... > >> > >> Thanks, > >> > >> Richard W5SXD > >> > >> _______________________________________________ > >> Flexedge mailing list > >> [email protected] > >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It > >> is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > > > > > > _______________________________________________ > > Flexedge mailing list > > [email protected] > > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It > > is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
