On 11 Jul 2002 15:28:46 -0700, Victoria Welch <[EMAIL PROTECTED]> wrote in message <[EMAIL PROTECTED]>:
> On Thu, 2002-07-11 at 11:49, Arnt Karlsen wrote: > > On 10 Jul 2002 10:13:46 -0700, > > Victoria Welch <[EMAIL PROTECTED]> wrote in message > > <[EMAIL PROTECTED]>: > > > > Welcome, Vikki. > > > > > No problems since :-), but then again I only boot w98 anymore > > > for my scanner and CDRW. > > > > ..in your bootloader config file, try "hdÐ=ide-scsi" > > where Ð is your CDRW's /dev/hdÐ. I use "hdc=ide-scsi". <...> > The last time I tried this CDRW (AccessTek CW1601) under linux, I had > the only hard system crash I can remember (in linux). The system hung > solid requiring multiple power cycles before it would re-boot and the > CDRW that was in there (this one is a replacement) never worked > reliably after that and eventually just died. ...and you tried 'cdrecord -scanbus' etc like in the recipes in 'http://tldp.org/HOWTO/CD-Writing-HOWTO-2.html'? <...> > Things are improving, I only have three things left that require > windoz and will replace two of them as soon as I can and the third on > the author is working at porting to linux :-). .._what_ is your author porting? :-) > Thanks & take care, Vikki. -- ..med vennlig hilsen = with Kind Regards from Arnt... ;-) ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
