Hi Chris
Chris Wilkinson writes > >Hi there, > >Innis Cunningham wrote: > > Hi Chris > > > > > > > > It uses UTC. > > > > What I do to check a new AI aircraft movement is to set FG to start at >noon > > at the airport I am using.As soon as FG starts I check what the UTC time >is > > from > > the time of day menu.I then go back to the traffic xml file for the >aircraft > > in question > > and make its departure time one minute or so after the UTC time I got >from > > the > > time of day menu. Then the aircraft should show parked somewhere on the > > airfield. > > Be aware that there has been a problem in the past were AI aircraft were > > parked > > below the surface so it might be worth a look with the UFO to make sure >the > > aircraft > > in question is not below the surface. > > > > To cut out any possible errors could I suggest that you use one of the >UA > > 737 schedules > > just comment out all but the top traffic pattern and use NZCH instead of > > KSFO see if the > > aircraft shows then. > > Another thing to check is when you first start FG is to look in the >property > > tree under AI/models > > and make sure you have at least two aircraft in there.Aircraft [] is the >737 > > taking off from KSFO > > and any other aircraft should be your traffic.Check the position of any > > other aircraft to see exactly > > were it is.It maybe at NZCH but at 30000 Ft. > >Thanks for the tips. I've tried to alter a UAL traffic file, but still >get no a/c in sight, either above or below ground (checked by using >ufo). I note that there are several aircraft under ai/models, but the >only property under each of those is radar, which has no value shown... This would indicate to me that the traffic is working but is out of range. > >I tried to change my new SQ.xml and have had some segfaults now, after >altering it a couple of times. Is there a more verbose log I can use >to see where the segfaults come from? I've looked at my xml and it seems >fine... Ok I guess we need to make sure that your AI is working.To do this we will use KSFO. Start at KSFO at time of day "morning" if AI is working you should see a 737 take off beside you on 28L also you should see a UA 737 on the right side of 28R up past the maintance hangar and another one sitting on top of the main terminal.In the property browser under AI/models you should have three aircraft and one carrier.If you dont see any of this then your AI is not activated. If you do see the above then AI is working and there is some mistake in your traffic file. If you could do the following and see what happens. Open the N376UA.XML file in your Traffic/UAL/737 folder and change the following. Departue port to NZCH Depart time to 00:27:00 Arrival port to any airport and time. This in the first flight in the schedule. Comment out all the remaining flights in the schedule leaving the </aircraft> and </trafficlist> active. Now start FG at NZCH at "time of day" noon you should see a UA737 sitting half on the appron half on the taxiway adjacent the tower and two aircraft in AI/models in the browser. Mail me off list if you are still having trouble and we can try and get it sorted. Kind regards, > >Chris Wilkinson, Brisbane, Australia. Cheers Innis ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Flightgear-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/flightgear-users
