> I do a simple test and I found that I can see the > theretentivity of vision when delay is > 0.02, a little > small than 1/25. So 0.01 is enough for most of people I guess.
What refresh rate is your monitor? Most lcd panels seem to be 60Hz or similar. So 0.01 (100Hz) is probably still wasteful, as you might render 100 frames of which only 60 will ever be displayed, 40 may be lost entirely - that's pretty wasteful... In which case, 0.017 might be worth a shot? Though, that's about 59Hz, so depending on how your graphics card handles things, that might actually beat really horribly with the 60Hz monitor refresh, so... And note that 0.02 is not 1/25 (or 25Hz), it's 50Hz - twice as fast. To be honest, I'd be surprised if most people noticed the flicker at 0.04 (which is 25Hz) in practice on a typical monitor, especially the current crop of lcd monitors... SELEX Galileo Ltd Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ******************************************************************** _______________________________________________ fltk mailing list [email protected] http://lists.easysw.com/mailman/listinfo/fltk
