Hi, The other day, i inserted a brand new NI-XMR-10Gx4 in an XMR-4, but it won't work correctly. If i do a "show module", i see the following output on the slot :
S2: NI-XMR-10Gx4 4-port 10GbE Module CARD_STATE_INTERACTIVE 20 0012.f2f5.d128 (S2: Configured as NI-XMR-1Gx20-SFP 20-port 1GbE/100FX Module) What is the correct procedure to configure S2 as ni-xmr-10gx4 ? I tried : tel...@r(config)#module 2 ni-xmr-4-port-10g Error: Please remove module from slot 2 first tel...@r(config)# Is this the only (and correct) way? -- Kind regards, Signet bv Remco Bressers _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
