I think I found the problem. The problem occur since 03/14/2001. The
following files could be infvolved:

P dev/ata/ata-all.c
P dev/ata/ata-all.h
P dev/ata/ata-disk.c
P dev/ata/ata-disk.h
P dev/ata/atapi-all.c
P dev/ata/atapi-all.h
P dev/ata/atapi-cd.c
P dev/ata/atapi-cd.h
P dev/ata/atapi-fd.c
P dev/ata/atapi-fd.h
P dev/ata/atapi-tape.c
P dev/ata/atapi-tape.h

It should be somthing in ata-all.c. Because since 03/14 the ata1 probe
doesn't fail and uses irq 15 same as the ahc. But this shouldn't be a
problem. I am right?

=> boot failed (since 03/14/2001)

atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1
on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000
ata0: mask=03 status0=50 status1=00
ata0-master: ATAPI probe 14 eb
ata0-slave: ATAPI probe 14 eb
ata0: mask=03 status0=10 status1=00
ata0: devices=0c
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at 7.4 (no driver attached)
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem
0xdf000000-0xdf000fff irq 15 at device 9.0 on pci0
ahc0: Platform free
device_probe_and_attach: ahc0 attach returned 12

=> boot working (03/13/2001 and before)

atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1
on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=14 b=eb
ata0-slave: ATAPI probe a=14 b=eb
ata0: mask=03 status0=10 status1=00
ata0: devices=0c
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
pci0: <bridge, PCI-unknown> at 7.4 (no driver attached)
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem
0xdf000000-0xdf000fff irq 15 at device 9.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 424 instructions downloaded
aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs

-- 
Falco Krepel                    Phone:  +49-(0)30 - 34 63 - 7 276
GMD-FOKUS                       Fax:    +49-(0)30 - 34 63 - 8 276
Kaiserin-Augusta-Allee 31       e-mail: [EMAIL PROTECTED]
10589 Berlin                    WWW:    http://www.fokus.gmd.de/usr/krepel

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to