just fo fun, try using this, you will need tuntap and others :)
------------------
#? Habilita conexões
# echo 1 > /proc/sys/net/ipv4/ip_forward

# Libera acesso ao tuntap
chmod 666 /dev/net/tun

# Cria um Bridge
brctl addbr br0
# Re-conecta eth0 no Bridge
ifconfig eth0 0.0.0.0 promisc up
brctl addif br0 eth0
# Agora quem tem o IP é o Bridge
ifconfig br0 $SYS_IP netmask 255.255.255.0 up
# cria 3 devices tap0 tap1 tap2
tunctl -u $DOS_USER -t tap0
tunctl -u $DOS_USER -t tap1
tunctl -u $DOS_USER -t tap2
# Ativa cada um
ifconfig tap0 0.0.0.0 promisc up
ifconfig tap1 0.0.0.0 promisc up
ifconfig tap2 0.0.0.0 promisc up
# conecta com Bridge
brctl addif br0 tap0
brctl addif br0 tap1
brctl addif br0 tap2

# dispositivo do VMware
brctl addif br0 vmnet1

# Recria Rota para o Gateway
route add -net 0.0.0.0 gw $SYS_GW

# mostra o Bridge e rotas (demora na primeira vez)
brctl show
route -n

exit


-------------------

Larry escreveu:
> I'm trying, just for fun, to get arachne to run in Freedos in dosemu on my 
> Linux machine. No luck so far. 
> 
> I'm trying to use the tap thing. Use the lunctl command to make a lun0 and 
> set it up with ifconfig.
> 
> But when I try to run xdos, first I get a "cannot allocate TAP device, and 
> arachne doesn't see a network.
> 
> Any suggestions?
> 
> 
> --- On Wed, 7/2/08, Aitor Santamaría <[EMAIL PROTECTED]> wrote:
> 
>> From: Aitor Santamaría <[EMAIL PROTECTED]>
>> Subject: Re: [Freedos-user] put drivers in XMS
>> To: freedos-user@lists.sourceforge.net
>> Date: Wednesday, July 2, 2008, 5:33 PM
>> Hello,
>>
>> 2008/6/3 Michael Reichenbach
>> <[EMAIL PROTECTED]>:
>>> iw2evk schrieb:
>>>> It's possible under freedos 1.0 put the
>> drivers in XMS insted UMB?
>>>> Can be used cloaking.exe , and in wich modality?
>>>>
>>>> many thanks in advance.
>>>>
>>>> Roberto iw2evk
>>> Hey!
>>>
>>> I had some time ago a similar suggestion. Loading into
>> EMS/XMS would be
>>> a bad idea because more outdated applications use
>> EMS/XMS.
>>
>> Well, in fact it gave me idea that EMS could actually be
>> suitable for
>> DISPLAY: you book a couple of contiguous pages, then upon
>> call to
>> int10h select those pages as available.
>>
>> Note (Eric) that these changes wouldn't change at all
>> the DISPLAY
>> core, but the particular EGA/VGA driver.
>>
>> Regards,
>> Aitor
>>
>> -------------------------------------------------------------------------
>> Sponsored by: SourceForge.net Community Choice Awards: VOTE
>> NOW!
>> Studies have shown that voting for your favorite open
>> source project,
>> along with a healthy diet, reduces your potential for
>> chronic lameness
>> and boredom. Vote Now at
>> http://www.sourceforge.net/community/cca08
>> _______________________________________________
>> Freedos-user mailing list
>> Freedos-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/freedos-user
> 
> 
>       
> 
> 
> -------------------------------------------------------------------------
> Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
> Studies have shown that voting for your favorite open source project,
> along with a healthy diet, reduces your potential for chronic lameness
> and boredom. Vote Now at http://www.sourceforge.net/community/cca08
> _______________________________________________
> Freedos-user mailing list
> Freedos-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/freedos-user
> 
> 

-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Freedos-user mailing list
Freedos-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freedos-user

Reply via email to