I could use some advice. I have a beige G3/300 I am working on. I got the breaking glass sound upon boot attempt and the power supply smoked. I suspect this unit has seen the aftermath of a lightning strike.
I replaced the supply and still got the breaking glass. So I changed out the motherboard and ram. So now I sit with this box having new power supply and motherboard and the only remaining components from the old setup are the case and the processor. I put new RAM in it as well as drives. I do suspect the processor to be bad but the issue now is I cannot get the new components for power up at all to even check the processor. I found the power reset on the motherboard but I cannot find the cuda switch (if there is one) The power reset does not help. I am looking for ideas to get the unit to power up as I would really like to resurrect the box. -- Thanks, Chuck Leavens Director of Engineering and I.T. WDUQ FM Duquesne University Pittsburgh PA 412-396-5508 -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
