Greetings all,
Here is a B+W G3 stumperoo for me:
*Two motherboards, both Rev 2, one with a 350mhz CPU
and the other a 400mhz CPU, each OEM and w/ appropriate
Jumper blocks
*Both boards fine, except the 400mhz board has a bad 66mhz PCI slot
*Plan: put 400mhz CPU in 350mhz board, with jumper blocks also moved
(so that I can have 4 PCI slots again)
*Result: 350mhz board with newly acquired 400mhz CPU:
dead in the water, with no success with swapping HDs, RAM, etc.
(I did not attempt the 400mhz board with its new 350mhz CPU)
*Return to original state: once again all things are fine.
Is it possible that some "Rev. 2" CPUs are incompatible w/ some Rev. 2
boards? (all involved pieces are Apple OEM)
Just curious.
Best regards,
Dana
--
G-List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-List list info: <http://lowendmac.com/lists/g-list.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
