I have a Quicksilver 1GHz DP running 10.4.11, with a SCSI card (Adaptec 2930) in it to run a big old SCSI Minolta film scanner (Dimage Scan Multi II). The scanner came with its proprietary Minolta software ("Dimage Scan Utility"), which works very well, but it only works in in 10.3.9.
So, to use the scanner, I have to reboot back into 10.3.9 (which is on an external hard drive), do the scans in 10.3, and then reboot into 10.4 again to use them. This is OK, but slow and kind of a nuisance. I sure wish I could scan film in 10.4.11. There are no updates on the Minolta website beyond what I have, which is 2004 software. Anybody got any idea why this software will work in 10.3, but not in 10.4, and how I might get it to work in 10.4? Thanks for any help! Tom --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---