On 15/10/2008, at 1:52 PM, Tom wrote:
> > I have a Quicksilver 1GHz DP running 10.4.11, with a SCSI card > (Adaptec 2930) in it to run a big old SCSI Minolta film scanner > (Dimage Scan Multi II). The scanner came with its proprietary Minolta > software ("Dimage Scan Utility"), which works very well, but it only > works in in 10.3.9. > > So, to use the scanner, I have to reboot back into 10.3.9 (which is on > an external hard drive), do the scans in 10.3, and then reboot into > 10.4 again to use them. This is OK, but slow and kind of a nuisance. I > sure wish I could scan film in 10.4.11. > > There are no updates on the Minolta website beyond what I have, which > is 2004 software. > > Anybody got any idea why this software will work in 10.3, but not in > 10.4, and how I might get it to work in 10.4? > > Thanks for any help! > > Tom G'day Tom Try Vuescan http://www.hamrick.com/vsm.html Regards Santa --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---