DC Just had a tinker and a second look. I took the face plate off the card and it will fit in the AGP slot, but it sits slightly back from the back of the machine, meaning I would have to feed the monitor cable through the back of the machine about an inch.
I also had to remove the modem card as it wouldn't allow the card to sit properly. Problem I have is, my monitor is VGA only and this card is ADC/DVI. Can I run the G4 with both cards installed and my monitor hooked to the old card. Can you run a Mac with two graphics cards installed? I know this might sound pointless but at least I should be able to see the AGP card in System Profiler. I don't want to go any buy a new monitor or a VGA-to-DVI converter if this card then doesn't work. With both cards installed (and the monitor hooked to the ATI card) the machine will not get any further than the grey apple screen. I tried it without the AGP card installed and it boots as normal. Any ideas? Simon ---------- Forwarded message ---------- From: Simon Royal <[EMAIL PROTECTED]> To: [email protected] Subject: Re: GeForce FX5200 In Sawtooth Date: 18 Oct 2008 22:24:49 +0100 DC I definitely have a Sawtooth, not a Yikes. It has an Airport card in its slot - which the Yikes didn't have. However, the previous owner has removed the AGP graphics card and put in a PCI ATI Rage 128 Pro, looks like it is from the B&W G3. I have installed regular AGP cards before in other machines and I know they are a little tricky at times, but this one just doesn't want to fit. It already has had the card cut and taped over. Simon --- http://www.simonroyal.co.uk - Mac news, reviews, guides, upgrades, hacks and more... - http://www.nmug.org.uk - webmaster for Norwich Mac User Group - The box said requires Windows XP or better, so I bought an Apple Mac. On Oct 18 2008, dc wrote: I hope you're not trying to fit it into a "Yikes" with a PCI graphics slot.... Just make sure you are putting it in the AGP slot (the first slot, the one toward the center of the motherboard) and opening the AGP tab at the back of the slot (toward the center of the motherboard). Don't put too much pressure on the tab or it will snap off, it only needs to move a slight bit to let the card seat. I guess you must be familiar with it since you took the original card out? And be careful not to move the tape that is covering pins 3 & 11 or all you will see is a black screen or KP when you startup. On Oct 18, 4:58 pm, Simon Royal <[EMAIL PROTECTED]> wrote: > Hi > > Andy from this G3-5 list very kindly sent me a USB2 card for my Sawtooth > which works fine. He also sent me a graphics card to replace the ATI card > in it. > > It is an nVidia, model number A146. Googling it brought it up as an nVidia > GeForce 5200 FX. > > I cannot seem to get it in my Sawtooth. Searching Google again it seems > you need to hack it and cover some of the edges with tape. It looks as if > this is already done, but I still can't get it in. > > Am I being thick or is there something esle I should be doing? > > Simon > > ---http://www.simonroyal.co.uk- Mac news, reviews, guides, upgrades, > hacks and more... -http://www.nmug.org.uk- webmaster for Norwich Mac User > Group - The box said requires Windows XP or better, so I bought an Apple > Mac. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
