On Feb 10, 2012, at 3:17 PM, Bruce Johnson wrote:
On Feb 10, 2012, at 12:29 PM, Jesse wrote:
So does anyone have experience using this card in anything other than
the Xserve?
It SHOULD "just work", as the only difference between this and a
retail Radeon 7000, iirc, was the lack of the other ports. Have you
tried it on a more modern monitor than the old 19" one? It's
remotely possible it's putting out a signal that won't work on the
monitor, but my suspicion is that it's a dead card.
Yes, they "just work". At least as tested through 8.x, 9.x and 10.2
in a beige and with no reports of problems from the 30 or so I sold
on the swap list. They use the same drivers and deliver the same
performance as the Mac specific retail cards, just without the DVI
and S-Video ports.
If it is not working after all the standard easy fixes (pram and cuda
reset, making sure you have the drivers installed) it is, in the
immortal words of one of the great Doctors, Dead Jim (er, Jesse).
Len
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/g3-5-list
