On Jan 14, 2013, at 12:18 AM, DLC wrote: > Thank you, gentlemen, for responding. You're info is helping my memory. Len, > I followed yor lead and found a good 80-68-50 SCA adapter on eBay for under > $4 shipped, so hurrah! Thank you. Bill, I believe our card at school was > indeed an Atto - the only one Digidesign approved for ProTools at that time, > iirc. > Will check Trish's Hardware Hell; never heard of it :-) > Thanks again, > Dana
Here is some more information about my setup ... which I call my "SCSI Mac". Turns out I have 2 SCSI cards in my Yikes! 450MHz G4: I am trying to remember how things are setup ... guessing about the 68 to 80 and 68 to 50 pin adapters and such. One card is for the SCA (I believe it is called) Seagate scsi harddrive and one for my UMAX scsi scanner. Under OS X Tiger 10.4: ATTO, ExpressPCIPro scsi IIRC Internal 68 --> Internal 80 for Seagate SX150176LC 50GB harddrive Vendor ID 0x1000 Device ID 0x000f ROM Revision 1.6.6f0 Revision ID 0x0004 ATTO, ExpressPCIProUL3D scsi-2 IIRC Internal 68 --> External 50 for UMAX Astra 2600 Scanner Vendor ID 0x1000 Device ID 0x0020 ROM Revision 1.6.6f0 Revision ID 0x0001 I have some software I believe I used called Atto Configuration Tool. I am trying to upload it to my Dropbox, but something is keeping me from providing you with the link … a permissions problem here, since I have recently Migrated to a new computer. Will get back to you on this. Don't have any information about OS 9, but the SCSI cards might work fine under 9 without any additional drivers or firmware updates. All of this is just my best recollection / best guesses ... so, Beware ... and Proceed at Your Own Risk ... : ) -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list
