thegeezer wrote: > this is pretty bad. enough to really go and get a replacement asap, > and turn that disk off if you can. the self test stops at the first > error it comes to and in this case it is LBA#2905482560 for > calculation of where the error is check out the smartcl [1] site which > will help you to mark the block bad though the data that was in that > block is probably lost forever. i'd also suggest you run # smartctl -a > /dev/sdc and paste the results here. the crucial rows are 196/197 the > reallocated sector counts and pending sector counts. they show how > many blocks have been reallocated, and also how many are pending. this > will give you a scaling factor, at the moment you are in trouble, if > these figures are very high you are in very high trouble, if they are > low you are in low trouble. [1] > http://smartmontools.sourceforge.net/badblockhowto.html
Here is the output: root@fireball / # smartctl -a /dev/sdc smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.14.0-gentoo] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-9YN166 Serial Number: Z1F0PKT5 LU WWN Device Id: 5 000c50 04d79e15c Firmware Version: CC4C User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jun 25 02:46:39 2014 CDT ==> WARNING: A firmware update for this drive is available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/223651en SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 584) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 340) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 234421760 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 99909120 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 16379 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 34 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 069 063 045 Old_age Always - 31 (Min/Max 26/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9 193 Load_Cycle_Count 0x0032 093 093 000 Old_age Always - 14284 194 Temperature_Celsius 0x0022 031 040 000 Old_age Always - 31 (0 17 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 104 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 104 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 15955h+37m+28.932s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 52221690631887 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 74848968465606 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 60% 16365 2905482560 # 2 Extended offline Completed: read failure 60% 16352 2905482560 # 3 Extended offline Completed without error 00% 8044 - # 4 Extended offline Completed without error 00% 3121 - # 5 Extended offline Completed without error 00% 1548 - # 6 Short offline Completed without error 00% 1141 - # 7 Extended offline Completed without error 00% 719 - # 8 Extended offline Completed without error 00% 525 - # 9 Short offline Completed without error 00% 516 - #10 Extended offline Completed without error 00% 18 - #11 Extended offline Completed without error 00% 5 - #12 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@fireball / # Does that help shed any light on this situation? If you need more info, just let me know. Off to newegg. BRB Dale :-) :-) -- I am only responsible for what I said ... Not for what you understood or how you interpreted my words!
