----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- In a message dated 04/27/2002 8:51:44 PM Eastern Daylight Time, [EMAIL PROTECTED] writes:
Interesting. The new header tank fuel gauge has NO holes in it to vent, whatsoever....... Its a sight gauge that we secured to the top of the fuel cap after the old gauge broke. It has a rubber cap on the top of it that I could just take off, that would allow venting... Matt; I think you have found the problem with your engine. The header tank must be vented in order for the fuel to properly flow to the carburetor. Where did you obtain this new fuel gauge? I know the ones from Skyport have vent holes drilled in them. If you still have the old gauge, put it back on for a test flight. I think you will find the problem solved. Then return the new fuel cap and exchange it for one that is vented. Lynn ==^================================================================ This email was sent to: [EMAIL PROTECTED] EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
