----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Just make sure to "REMOVE BEFORE FLIGHT". :-) (Sorry, but somebody had to say it. And I it's been a couple of weeks since I've heard form Dennis.) -----Original Message----- From: Bob Saville [mailto:[EMAIL PROTECTED] I have a 5 gallon bucket filled with cement, and a galvanized pipe sticking straight up from the center of it. At the top of the pipe is a 'v' shaped notch (to straddle the tail tiedown loop) with a hole drilled through it in order to insert a bolt, screw driver, or whatever to hold it in place. This will do a good job of holding the tail down to whatever angel you have dictated by the length of the pipe. If you want it to be used at different angles, use a very short piece of pipe and secure a piece of chain onto the pipe. Then you can use variable links at the top of the chain in order to lower the tail to whatever height you want it to be. Yes, it's a bit heavy to move around, but it's doable. Bob Saville N3396H 415C Eugene, OR ========================== To leave this forum go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
