http://bugs.gpodder.org/show_bug.cgi?id=69
--- Comment #14 from Paul Rudkin <[EMAIL PROTECTED]> 2008-04-14 21:30:14 --- (In reply to comment #13) > After a short testing, I experienced a few problem (I believe you if you tell > me it's difficult to solve ;)): It's just difficult for a novice like me! ;) > * after playing a while with the limit download, I was enabled to set it again > to 1. It acts like if it was disabled. Uncheck and check the box again did not > help. Canceling the whole download and starting again solved the problem. I am not 100% sure what you mean here. Are you able to elaborate a bit for me please? Did you simply check/uncheck the Limit Rate check box and it had no effect? > * Rate limit seems not to be calculated correctly. Downloading only one > episode, I set the rate to 0,5: download rate is actually 5Kb after > stabilization. Setting it to 3,25kb, is actually 6kb. setting to 50Kb is > almost > OK I confess to not testing at such small rates. I was testing at 20Kb/s and above, The actual lower bandwidth limit is going to be a function of your actual download bandwidth. I have just done a trial and like you I was only able to get the limit down to around 5kb/s. With a modification I was able to get it down to 1Kb/s. I guess it depends what low limit we would like to achieve? I'd be interested in your thoughts. -- Configure bugmail: http://bugs.gpodder.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are watching all bug changes. _______________________________________________ gPodder-Bugs mailing list [email protected] https://lists.berlios.de/mailman/listinfo/gpodder-bugs
