I found that you can put plexiglass or some other thin sturdy material on either side of the foam and bolt through it from side to side, and that makes a sturdy mounting surface for all sorts of things. You could also use some contact cement for good measure.
If you did a patch of that on the door and on the frame next to it, and then put a little wood or something in between on the edges, you could even install a proper door knob. Jack On Sun, Jul 17, 2011 at 8:05 PM, Milt Fisher <[email protected]> wrote: > Anyone have a good idea for a door latch for the standard door on an H12 HY? > I don't want to have to add a lot of plywood or other material, I just want > to use the cut out foam panel door. It needs to be latchable and > unlatchable from both the inside and the outside. > Thanks, > Milt > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/hexayurt?hl=en. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/hexayurt?hl=en.
