Hi, trying to figure out a better way to reinforce doors. Currently, we use 3/8" ply, framed and hinged. The Rmax is now velcroed to the ply. Works good but there are issues as the bottom portion of the ply cracks. I am looking for a solution to doors that provide support, is hinged and can be easily adhered to Rmax. Wondering about design of a metallic frame in and out, that could be bolted together, sandwiching the ply and Rmax and providing for support.
In the photo below, we left approx 7” on the bottom (& is bolted, not velcro). Newer doors are at least 12” inch on the bottom but still split. Thanks for any suggestions and feedback, Peace, Hal -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
