Got any pictures Vlad? Thx
> On Jul 4, 2016, at 9:28 AM, Vladimir Khodel <vkho...@gmail.com> wrote: > > .... and place a sheet metal bend in a square C profile over that... > Overkilling it since 2010 :) > > On Mon, Jul 4, 2016 at 9:27 AM, Vladimir Khodel <vkho...@gmail.com > <mailto:vkho...@gmail.com>> wrote: > I laminated 2 strips of 3/4" ply for the frame - going strong for 4 years > now, but is a bit bulky indeed (I also use a ratchet strap around the entire > building to keep things tight, so the door is the main structural element for > me, see http://www.appropedia.org/BFD_mod > <http://www.appropedia.org/BFD_mod>). > > For threshold protection I sandwich the bottom foam strip between door frame > and a piece of 2x4 > > On Mon, Jul 4, 2016 at 9:16 AM, hal muskat <phoe...@rainbowpuddle.com > <mailto:phoe...@rainbowpuddle.com>> wrote: > Hi, trying to figure out a better way to reinforce doors. Currently, we use > 3/8" ply, framed and hinged. The Rmax is now velcroed to the ply. Works good > but there are issues as the bottom portion of the ply cracks. I am looking > for a solution to doors that provide support, is hinged and can be easily > adhered to Rmax. > Wondering about design of a metallic frame in and out, that could be bolted > together, sandwiching the ply and Rmax and providing for support. > > In the photo below, we left approx 7” on the bottom (& is bolted, not > velcro). Newer doors are at least 12” inch on the bottom but still split. > > <Burning Man 2013 144.jpeg> > > Thanks for any suggestions and feedback, Peace, Hal > > > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com > <mailto:hexayurt+unsubscr...@googlegroups.com>. > To post to this group, send email to hexayurt@googlegroups.com > <mailto:hexayurt@googlegroups.com>. > Visit this group at https://groups.google.com/group/hexayurt > <https://groups.google.com/group/hexayurt>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. > > > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com > <mailto:hexayurt+unsubscr...@googlegroups.com>. > To post to this group, send email to hexayurt@googlegroups.com > <mailto:hexayurt@googlegroups.com>. > Visit this group at https://groups.google.com/group/hexayurt > <https://groups.google.com/group/hexayurt>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>. -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
