Sorry, only what is linked from that appropedia article... it's from the first year, so no threshold reinforcement there... I'll try to add it when we come back...
On Mon, Jul 4, 2016 at 10:38 AM, hal muskat <phoe...@rainbowpuddle.com> wrote: > Got any pictures Vlad? Thx > > > On Jul 4, 2016, at 9:28 AM, Vladimir Khodel <vkho...@gmail.com> wrote: > > .... and place a sheet metal bend in a square C profile over that... > Overkilling it since 2010 :) > > On Mon, Jul 4, 2016 at 9:27 AM, Vladimir Khodel <vkho...@gmail.com> wrote: > >> I laminated 2 strips of 3/4" ply for the frame - going strong for 4 years >> now, but is a bit bulky indeed (I also use a ratchet strap around the >> entire building to keep things tight, so the door is the main structural >> element for me, see http://www.appropedia.org/BFD_mod). >> >> For threshold protection I sandwich the bottom foam strip between door >> frame and a piece of 2x4 >> >> On Mon, Jul 4, 2016 at 9:16 AM, hal muskat <phoe...@rainbowpuddle.com> >> wrote: >> >>> Hi, trying to figure out a better way to reinforce doors. Currently, we >>> use 3/8" ply, framed and hinged. The Rmax is now velcroed to the ply. Works >>> good but there are issues as the bottom portion of the ply cracks. I am >>> looking for a solution to doors that provide support, is hinged and can be >>> easily adhered to Rmax. >>> >>> Wondering about design of a metallic frame in and out, that could be >>> bolted together, sandwiching the ply and Rmax and providing for support. >>> >>> In the photo below, we left approx 7” on the bottom (& is bolted, not >>> velcro). Newer doors are at least 12” inch on the bottom but still split. >>> >>> <Burning Man 2013 144.jpeg> >>> >>> Thanks for any suggestions and feedback, Peace, Hal >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "hexayurt" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to hexayurt+unsubscr...@googlegroups.com. >>> To post to this group, send email to hexayurt@googlegroups.com. >>> Visit this group at https://groups.google.com/group/hexayurt. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com. > To post to this group, send email to hexayurt@googlegroups.com. > Visit this group at https://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com. > To post to this group, send email to hexayurt@googlegroups.com. > Visit this group at https://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
