I use sheet metal angles made for edging suspended ceilings, plexi, and aluminum piano hinges. Deets here: http://steampunkworkshop.com/hexayurt-burning-man/
Jake On Monday, July 4, 2016 at 12:16:43 PM UTC-4, Black Rock Hexayurts wrote: > > Hi, trying to figure out a better way to reinforce doors. Currently, we > use 3/8" ply, framed and hinged. The Rmax is now velcroed to the ply. Works > good but there are issues as the bottom portion of the ply cracks. I am > looking for a solution to doors that provide support, is hinged and can be > easily adhered to Rmax. > > Wondering about design of a metallic frame in and out, that could be > bolted together, sandwiching the ply and Rmax and providing for support. > > In the photo below, we left approx 7” on the bottom (& is bolted, not > velcro). Newer doors are at least 12” inch on the bottom but still split. > > > Thanks for any suggestions and feedback, Peace, Hal > > > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
