Very cool web site, Jake, thank you for documenting your projects! On Tue, Jul 5, 2016 at 8:34 AM, Jake von Slatt <[email protected]> wrote:
> I use sheet metal angles made for edging suspended ceilings, plexi, and > aluminum piano hinges. Deets here: > http://steampunkworkshop.com/hexayurt-burning-man/ > > Jake > > > On Monday, July 4, 2016 at 12:16:43 PM UTC-4, Black Rock Hexayurts wrote: >> >> Hi, trying to figure out a better way to reinforce doors. Currently, we >> use 3/8" ply, framed and hinged. The Rmax is now velcroed to the ply. Works >> good but there are issues as the bottom portion of the ply cracks. I am >> looking for a solution to doors that provide support, is hinged and can be >> easily adhered to Rmax. >> >> Wondering about design of a metallic frame in and out, that could be >> bolted together, sandwiching the ply and Rmax and providing for support. >> >> In the photo below, we left approx 7” on the bottom (& is bolted, not >> velcro). Newer doors are at least 12” inch on the bottom but still split. >> >> >> Thanks for any suggestions and feedback, Peace, Hal >> >> >> -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
