Hmmm, I see from the parts list this is a Q1247-60023, "Automatic Roll Replacement Kit" which includes both the powered bracket and the back feed portion. I do not recall if the NR came with the standard cleanout (I presume with only the sheet feed slot?), does anyone else remember? If so, I could rummage around and try to find it. Still, I would think that I could use the upper sheet feed slot properly without the power. After all, I did say I succeeded in inserting and printing on cut off sheets through the upper rear slot. Grrrr.
Anybody taken one of these apart? If it's dead anyway, and there's no "core charge" for giving them a dead part, I may just try to replace the bloody fuse myself. BTW, should I contact HP about it or the vendor that sold us the printer? The vendor is only about 100 miles away. Thanks for the advice. > -----Original Message----- > > > If its any consolation I've had the same problem. When the light goes > on the outside of the roll holder it means that the fuse is blown > inside. Sadly its not a replaceable part so the whole of that side of > the holder has to be replaced! I ordered my replacement in November > and I'm still waiting, albeit that I have received one wrong part so > far. I'm based in the UK so perhaps you will be luckier. > > As far as using the holder in the way that people use the pvc pipes > with the standard printers I think this is ruled out due to the > replacement back section on the 130nr which provides the roll feed. > This doesn't work without the power from the roll feed holder so won't > accept paper properly. You are therefore left with cutting the paper > from rolls and front feeding (which is what I have been doing since > November!). This is possible but really slows down the process. It > also provides the potential for more fingerprints, etc, so is not, to > my mind at least, a workable solution if you are doing any volume of > prints. > > Best of luck. > > David Whistance > Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
