As an HP reseller and service center I may be able to qualify some of this for you.
1. The 130nr is not scheduled to be discontinued. 2. The actual part# to be used on the HP parts store for the roll feed assembly is Q1247-60188. You can also use the actual sales part# Q1247A. Doing a simple google search on either of these numbers should also provide other sources closer to your area to obtain the part. Please note this is the entire assembly and not just a particular "side" Feel free to contact me by email if you need any other help [EMAIL PROTECTED] --- In [email protected], "karlnharrison" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "david627890" <david.whistance@> > wrote: > > > > If its any consolation I've had the same problem. When the light goes > > on the outside of the roll holder it means that the fuse is blown > > inside. Sadly its not a replaceable part so the whole of that side of > > the holder has to be replaced! I ordered my replacement in November > > and I'm still waiting, albeit that I have received one wrong part so > > far. I'm based in the UK so perhaps you will be luckier. > > This is worrying, there seems to be more than a few of us with this problem. I was lucky > UK HP customer services worked hard for me and managed to find me a dealer which still > had it in stock, so I could get a replacement. > > BUT, UK HP customer services said to me that the printer is discontinued and they (HP) do > not have any service parts for it any more. > > > > > > As far as using the holder in the way that people use the pvc pipes > > with the standard printers I think this is ruled out due to the > > replacement back section on the 130nr which provides the roll feed. > > This doesn't work without the power from the roll feed holder so won't > > accept paper properly. You are therefore left with cutting the paper > > from rolls and front feeding (which is what I have been doing since > > November!). This is possible but really slows down the process. It > > also provides the potential for more fingerprints, etc, so is not, to > > my mind at least, a workable solution if you are doing any volume of > > prints. > > Yeap, I was working like this for two months, it drove my stress levels through the roof. > The paper feed system is very very picky with purchased sheets and rolls, so cutting your > own is really hard, I have 24 inch guillotine and this would often require many cuts before > the printer would take up a sheet. > > When I had commissioned sales over the last month or so it took all myself control not to > throw the printer out of the window. > > Coupled with the fact the HP paper picks up finger prints easily, doing all this with cotton > gloves on was not fun.................... > > Karl > Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
