--- In [email protected], John Anderson <[EMAIL PROTECTED]> wrote: > > I suppose there are two possibilities: > > 1) The firmware update was botched for some unknown reason > > 2) The firmware has a bug, as the luminous landscape thread indicates, > and since so many people are experiencing the problem they pulled the > bad firmware until they fix the problem. > > In either case, it seems difficult or impossible to fix the problem > without replacing the formatter. And since my printer is out of > warranty, I may be out of luck even if HP had a bad firmware update. > > John >
Maybe reseating helps, take out the formatter, "boot" without it, turn device off again, reseat it and wish for the best. If you really feel like taking that thing apart, you can check the front panel connections, on the slim chance that some cable failed at the same Moment you ran the FW Update, but front panel errors are almost never the front panel, esp. when you can still read the System error on the Front Panel. A permanent 08:11 is bad news any way you spin it, I'm sorry I can't help you any further. ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
