Hello Robert,
On Tue, 05 Aug 2014 11:53:35 +1000, Robert Krawitz <[email protected]>
wrote:
I've observed a problem with the GL preview that makes it very hard to
use for many of my panoramas. Particularly when I use a wide angle
lens, I find that after I do enough optimization steps the preview
gets badly garbled such that it's essentially unusable. If I use a
normal or short telephoto lens, this usually doesn't happen.
The sequence of steps I usually use is:
[snip]
6) Remove all control points except between adjacent images (I shoot
panos with a lot of overlap, and I've found that control points
between non-adjacent images lead to larger errors in the output).
I see the problem here, I'm running Hugin-2014.1.0 (current development
source).
When I first open your .pto all is OK, but it quickly goes haywire when
any refinement is done.
I note your comment (6), above, but wonder if you still have the problem
is you try to stitch with less overlap, say leaving out every second image.
I can't try that here as I only have dummy images and there aren't the
control points between the non adjacent images.
Cheers,
--
Regards,
Terry Duell
--
A list of frequently asked questions is available at:
http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/hugin-ptx/op.xj3kvosyrs0ygh%40localhost.
For more options, visit https://groups.google.com/d/optout.
