On Tue, 05 Aug 2014 12:22:26 +1000, Terry Duell wrote: > Hello Robert, > > On Tue, 05 Aug 2014 11:53:35 +1000, Robert Krawitz <[email protected]> > wrote: > >> I've observed a problem with the GL preview that makes it very hard to >> use for many of my panoramas. Particularly when I use a wide angle >> lens, I find that after I do enough optimization steps the preview >> gets badly garbled such that it's essentially unusable. If I use a >> normal or short telephoto lens, this usually doesn't happen. >> >> The sequence of steps I usually use is: >> > > [snip] > >> 6) Remove all control points except between adjacent images (I shoot >> panos with a lot of overlap, and I've found that control points >> between non-adjacent images lead to larger errors in the output). >> > > I see the problem here, I'm running Hugin-2014.1.0 (current development > source). > When I first open your .pto all is OK, but it quickly goes haywire when > any refinement is done.
Correct, but at this point I've already performed quite a bit of refinement without hitting the problem. > I note your comment (6), above, but wonder if you still have the problem > is you try to stitch with less overlap, say leaving out every second image. > I can't try that here as I only have dummy images and there aren't the > control points between the non adjacent images. Even if I remove all but one image from the viewer, I have the same problem. -- Robert Krawitz <[email protected]> MIT VI-3 1987 - Congrats MIT Engineers 6 straight men's hoops tourney Tall Clubs International -- http://www.tall.org/ or 1-888-IM-TALL-2 Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/201408050225.s752PvkM027482%40dsl092-065-009.bos1.dsl.speakeasy.net. For more options, visit https://groups.google.com/d/optout.
