ED checks all left nibbles for num, the right nibble is not checked, but interpreted (digit select, field separator , etc).... see POP.MartinFrom a mobile, you can keep tpyos -------- Ursprüngliche Nachricht --------Von: Joseph Reichman <[email protected]> Datum: 23.02.26 20:41 (GMT+01:00) An: [email protected] Betreff: Re: ED fail to generate 0C7 Just on teams at work with SeymourThe receiving field has to have 20 or 21 to get a S0C7On Mon, Feb 23, 2026 at 2:15 PM Joseph Reichman <[email protected]>wrote:> I did>> Let me you what I did moved 12 bytes of X’FF’>> Into the source followed 12 bytes of X’00’ into the receiving field>> ED Receiving,source>> Under test it executes without a problem>> Thanks>> Get Outlook for iOS <https://aka.ms/o0ukef>> ------------------------------> *From:* IBM Mainframe Discussion List <[email protected]> on> behalf of Binyamin Dissen <[email protected]>> *Sent:* Monday, February 23, 2026 2:00:57 PM> *To:* [email protected] <[email protected]>> *Subject:* Re: ED fail to generate 0C7>> Look at the pOPs.>> On Mon, 23 Feb 2026 12:26:05 -0500 Joseph Reichman> <[email protected]> wrote:>> :>Hi> :>> :>Was just looking at a edit (ED) instruction> :>> :>The second operand which by the fact pattern was 12 bytes would mean> that operand 2 would have to be 7 bytes packed> :>> :>Looking at this under test> :>> :>The 7 bytes are all hex digits in the range of 0 - 9 without a sign> :>> :>Should of generated a S0C7>> --> Binyamin Dissen <[email protected]>> http://www.dissensoftware.com>> Director, Dissen Software, Bar & Grill - Israel>> ----------------------------------------------------------------------> For IBM-MAIN subscribe / signoff / archive access instructions,> send email to [email protected] with the message: INFO IBM-MAIN>----------------------------------------------------------------------For IBM-MAIN subscribe / signoff / archive access instructions,send email to [email protected] with the message: INFO IBM-MAIN
---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
