Hi,

 I am still working on my manifold gasket dilemma, and hope to have the new 
bolts tapped out today, but have been following this post regarding Galley 
stove tops. I am new tio the C-27 group(73-hull 929)  so I am fired up(no 
pun;lol) and ready to get into everything at once lol. Have any of you kept the 
original stove? Should I be concerned about trying to get it working? I have 
not taken much of a look at it yet, but believe I have the p-22a as I have 
noticed the stainless steel lid with cutting board on top. My stove looks to be 
in decent condition; however being a camper and dealing with the good ol colman 
set-ups for years I know that looks can be very deceiving lol.  The only thing 
I notice off the bat was that the left burner knob is stuck (I have not tried 
to force it at all) It appears to have a spring shaft which rotates the 
burner/fuel control valve so I am thinking I will need to free it up from 
sitting. I would imagine this stove was
 decent for the time, and being one whom appreciated "the originals" lol  I 
think it would be cool to get it working, unless there is a safty reason why I 
should not. Any thoughts?


Thanks,

John.


________________________________
From: Don Brooks <[email protected]>
To: [email protected]
Sent: Tuesday, June 16, 2009 9:05:47 AM
Subject: Re: [IC27A] Galley stove top




My boat also had a CNG stove and I did not like it for all the reasons John 
mentioned.  I looked into changing over to propane, but to do it right would 
require a vented locker and solenoid valve and switch panel.  The cost started 
to add up.  I got a new Origo 3000 on ebay for $240.  I did not gimbal it since 
we rarely cook under way, unless the conditions are VERY light.  On the average 
we use 2 quarts on alchol each year, so I always keep a spare quart under the 
galley counter.  Cooking time is about the same as CNG.  It is simple, safe and 
most of all, the chief cook loves it.
Don, #6293, Niceville, FL 




________________________________
From: The Emmerichs <[email protected]>
To: [email protected]
Sent: Monday, June 15, 2009 9:30:29 PM
Subject: RE: [IC27A] Galley stove top


My boat came with a CNG (compressed natural gas) stove.  While this is a safe 
system (CNG is lighter than air so it rises) , I had two problems with the 
system:
 
CNG is not available in Louisville, KY.  I would have to go to either 
Evansville or Indianapolis, IN to refill the tank.
The CNG tank was installed in the lazereatte(sp) and I didn’t feel I needed all 
that weight in the aft end of the boat.
 
I did not want to have to deal with propane in the boat.  I have a gas grill 
but don’t mount it on the rail unless we are going overnight and will use it.  
I realize that issues with leaking propane tanks are very rare but……..
 
So, I installed an Origo 3000 and have been very happy with it.  Yes, it was 
more expensive but I can sleep better.  I’m probably too paranoid but there is 
always the anchor to worry about.
 
John Emmerich
5874 TR
Louisville, KY
 
From:ic...@yahoogroups. com [mailto:IC27A@ yahoogroups. com] On Behalf Of Bill 
Pellegrino
Sent: Monday, June 15, 2009 3:23 PM
To: ic...@yahoogroups. com
Subject: RE: [IC27A] Galley stove top [1 Attachment]
 
[Attachment(s) from Bill Pellegrino included below] 



Hi Bryan,
 
I converted the original Pressure Alcohol stove into a new propane stove for 
under $50 on Aquadesiac.  
 
I bought a new camping stove from Harbor Freight and I installed the burner 
eliments into the old stove.  It was an easy conversion and the stove looks 
like it was made at the factory.
 
 http://www.harborfr eight.com/ cpi/ctaf/ Displayitem. taf?itemnumber= 35559
 
Good luck and Happy Sailing.

Bill Pellegrino_/)
SV Aquadesiac #5705
Port Edgewood, RI
 

________________________________

To: ic...@yahoogroups. com
From: brype...@yahoo. com
Date: Mon, 15 Jun 2009 16:33:12 +0000
Subject: [IC27A] Galley stove top


I need to replace the propane galley cook top. Any recommendations? There is a 
drawer below so the gimbaled version probably wont be practical anyway...

Thanks,

Bryan
Mukilteo, WA








      

Reply via email to